Operation (manual mode)
21
Cooking without Con@ctivity
2.0 (manual oper
ation)
The rangehood can be operated
manually if:
– The Con@ctivity 2.0 function is not
activa
ted.
– You have temporarily switched off the
Con@ctivity 2.0 function (see
"L
eaving automatic mode
temporarily").
Remote control
The main functions can be selected via
the r
angehood or by remote control.
The LED light on the remote control unit
will light up briefly when a function is
selected by remote control.
The maximum operating range of the
r
emote control is approx. 10 m.
However, this may be less depending
on the physical conditions present in
the room (e.g. furniture, walls).
The rear of the remote control unit is
magnetic which allows it to be attached
to various metal surfaces.
Extending the deflector plate,
switching the fan on
P
ress the "" button on the remote
control.
The deflector plate will come out. The
fan will switch on at level 2. The
symbol and 2 will light up in the power
l
evel display.
Switching on manually
The rangehood can also be operated
wi
thout the remote control, e.g. if the
remote control has been misplaced or
the battery is flat.
Re
move the grease filters.
The controls can now be accessed
th
rough the grease filter slots.
P
ress the On/Off touch control .
The deflector plate comes out and the
mot
or switches on at power setting 2.
You can change the power setting if
required.
Refit the gr
ease filters.
To Next Page
Loading...
Need help?
General
