Miele DG 6010 User Manual

Pre-heating
Your appliance has a pre-heating function. This heats the
oven interior to approx. 40 °C. The heating-up time is then
shorter as the oven interior is pre-heated and therefore the
cooking process takes less time.
The appliance is delivered with the pre-heating function
deactivated. If you wish to use it, you will need to alter the
setting (see "Settings").
When the pre-heat function has been activated, you can still
choose whether you want to use it for each programme.
The water container must be filled with water for
pre-heating and present in the appliance.
The pre-heating process will be cancelled if the door is
opened. You can start the process again by switching the
appliance off and then back on again.
Using pre-heat
^ Switch on the appliance.
100 will appear in the display. "°C" will start flashing. Do not
confirm.
After a few seconds, the pre-heating process will begin and
the display will show the temperature as it rises.
When pre-heating is finished, 100 will appear in the display
and °C will flash.
^
Place the food in the oven.
^
Set the temperature and duration as normal.
Not using pre-heat
^
Place the food in the oven.
^
Switch on the appliance.
100 will appear in the display. "°C" will start flashing.
^
Confirm this or set the required temperature.
^
Set the required duration.
Additional options
26

Miele DG 6010 Specifications

General

Oven type	Electric
Oven power	24 W
Steam cooking	Yes
Number of ovens	1
Total oven power	- W
Number of shelves	1 shelves
Oven net capacity	- L
Oven thermostat range	40 - 100 °C
Number of shelf positions	3
Total oven(s) interior capacity	24 L
Door hinge	Left
Control type	Sensor
Display type	LCD
Product color	Black
Control position	Front
Housing material	Stainless steel
Clock type	Electronic
Current	10 A
Connected load	2200 W
AC input voltage	230 V
Energy efficiency class	-

Weight and Dimensions

Depth	364 mm
Width	495 mm
Height	382 mm
Weight	17500 g
Interior dimensions (W x D x H)	335 x 272 x 239 mm