Operation
72
Switching on the dishwasher
Open the stopcock, if it is closed.
Open the door.
Make sure the spray arms can rotate
freely.
Touch thesensor control.
If the dishwasher has been switched
off for longer than 1minute, you will
need to hold the sensor control for
a bit longer (wipe protection).
The Programmes menu will appear in
the display.
Selecting a programme
Choose your programme according to
the type of crockery and the degree of
soiling.
The different programmes and their
uses are described under “Programme
overview”.
Select the programme you want in
the display.
The display will change to the Extras
menu.
You can now select the extras (see “Ex-
tras”).
To select a different programme, touch
the sensor control to return to the
Programmes menu.
To Next Page
Loading...
Need help?
General
