Miele G 7960 User Manual

Operation
73
Display of programme duration
The estimated duration of the selected
programme appears on the display be-
fore the programme begins. If the door
is opened during the programme, the
time left until the end of the programme
is displayed.
The displayed duration may vary for the
same programme. It is influenced by,
for example, the temperature of the in-
coming water, the reactivation cycle of
the water softener, the detergent type
and the amount of dishes and how
soiled they are.
When a programme is selected for the
first time, the display will show the aver-
age programme duration for a cold wa-
ter connection.
The programme durations shown in the
“Programme overview” chapter refer to
standard test loads and temperatures.
Each time a programme is run, the con-
trol module calculates the programme
duration according to the temperature
of the water taken into the dishwasher
and the size of the load.
Starting the programme
 Start the programme by closing the
door.
If necessary, confirm the previously
displayed message with OK.
The optical in-operation indicator light
comes on to show that a programme
sequence has been started.
If you open the door, the mes-
sageCrockery can be added may be dis-
played.
As long as this message is showing,
crockery can be added without com-
promising wash results.
 Risk of scalding due to hot wa-
ter.
During operation, water in the dish-
washer may be very hot.
During operation, only open the door
with extreme caution.

Miele G 7960 Specifications

General

Brand	Miele
Model	G 7960
Category	Dishwasher
Language	English