Miele G 7961 User Manual

Initial commissioning
27
Activating AutoDos
The display changes to the settings
screen for AutoDos (see “Automatic
dispensing/AutoDos” under
“Detergent”).
Even if you do not wish to use
AutoDos, you must remove the
transport locking device from the
PowerDisk compartment before
running the first program (see
“Activating AutoDos” under
“Detergent”).
You can activate AutoDos.
If you do not wish to use AutoDos, you
can manually dispense the detergent
via the detergent compartment (see
“Manual detergent dispensing” under
“Detergent”).
 Select the setting you want and
confirm with OK.
This setting applies to all programs and
you can change it in a program’s Extra
options menu.
Finally, prompts will appear in the
display.
After confirming these prompts with
OK, the messages Refill salt and start
the “QuickIntenseWash” program with the
“Express” option without a load and
Refill rinse aid may appear.
 Add salt and rinse aid if necessary
(see “Reactivation salt” and “Rinse
aid” under “Initial commissioning”).
 Select OK to confirm the messages.
The selected program will be shown
briefly in the display.
The display will then show the
estimated program cycle time for the
program selected.

Miele G 7961 Specifications

General

Brand	Miele
Model	G 7961
Category	Dishwasher
Language	English