Options
73
Timer
The timer gives you several options
for starting a program at a later time.
The start or finish time of a program can
be delayed. You can also use the
EcoStart or SmartStart functions to
benefit from cheaper energy rates at
night.
During manual detergent dispensing,
the detergent will clump together if
the detergent compartment is not
dry, and this may mean it is not fully
rinsed out.
When using the timer function, make
sure that the detergent compartment
is dry before adding detergent. Wipe
dry with a cloth first, if necessary.
Do not use any liquid detergents.
These can leak out.
Danger to health due to
detergent.
To prevent children coming into
contact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the
program, i.e., before you activate
the timer.
Activating the timer
Open the door.
Turn the dishwasher on using the
sensor button.
Select the desired program.
Touch theTimer sensor button.
TheTimer sensor button lights up.
You can choose between the Start at,
Finish at, or EcoStart functions, or
SmartStart if applicable.
Select the function you want.
The last time set for the timer will be
displayed and the hour number block
will be highlighted.
Select the time you want for the timer
using the sensor buttons and
confirm with OK.
If, while you are setting the time, you do
not apply any settings for several
seconds, the display will revert to the
previous menu. You will then have to
enter your settings again.
After you have activated the timer, all
the displays will turn off after a few
minutes to save energy.
You can also activate a timer via the
Miele app.
To Next Page
Loading...
Need help?
General
