Frequently Asked Questions
96
With the help of the following guide, minor faults in the performance of the
machine, some of which may result from incorrect operation, can be remedied
without contacting the Service Department. This will save you time and money
because you won't need a service call.
This guide may help you find the reason for the fault and help you correct it.
This section only lists faults that you can remedy yourself. All other faults are
shown in Fault FXX.
Technical problems
Problem Possible cause and solution
The dishwasher will not
start.
The door is not closed properly.
Raise the door upward until the catch engages.
The dishwasher is not plugged in.
Insert the plug.
The circuit breaker has tripped.
Reset the circuit breaker (see data plate for the
minimum fuse rating).
If the circuit breaker trips again, contact Miele
Service.
The dishwasher is not switched on.
Turn the dishwasher on using the sensor button.
The dishwasher stops
during a program.
The circuit breaker has tripped.
Reset the circuit breaker (see data plate for the
minimum fuse rating).
If the circuit breaker trips again, contact Miele
Service.
After the program has
started, the in-operation
indicator light is not
visible.
The indicator reflector panel was not correctly fitted.
Refit the indicator reflector panel correctly (see the
installation plan).
To Next Page
Loading...
Need help?
General
