Miele H 2465 B User Manual

Problem solving guide
67
Problem Cause and remedy
Spots like rust appear
on catalytic enamelled
surfaces.
The catalytic cleaning process does not remove
spices, sugar and similar deposits.
 Take the catalytic enamelled panels out of the
oven and remove this type of deposit with a mild
solution of hot water and washing-up liquid ap-
plied with a soft brush (see “Cleaning and care –
Cleaning the catalytic enamelled back panel ”).
The FlexiClip runners do
not push in or pull out
smoothly.
The bearings in the FlexiClip runners are not suffi-
ciently lubricated.
 Lubricate the bearings with the special Miele lub-
ricant.
Only the special Miele lubricant is designed for the
high temperatures in the oven compartment. Other
lubricants may resinify when heated and will gum
up the FlexiClip runners. You can obtain the spe-
cial Miele lubricant from your Miele dealer or from
the Miele Customer Service Department.
The oven interior light-
ing does not switch on.
The halogen lamp is faulty.
 Risk of injury caused by hot surfaces.
The oven gets hot during operation. You could
burn yourself on the heating elements, oven com-
partment or accessories.
Allow the heating elements, oven compartment
and the accessories to cool before manual clean-
ing.
 Disconnect the appliance from the mains. Switch
off at the wall and withdraw the plug from the
socket or switch off the fuse of the electrical in-
stallation.
 Turn the lamp cover a quarter turn anti-clockwise
to release it and then pull it together with its seal
downwards to take it out.
 Replace the halogen lamp (Osram66725AM/A,
230V, 25W, G9).
 Refit the lamp cover together with its seal and turn
clockwise to secure.
 Reconnect the appliance to the electricity supply.

Miele H 2465 B Specifications

General

Grill	-
Oven size	Medium
Oven type	Electric
Top heating	Yes
Number of ovens	1
Total oven power	- W
Total oven(s) interior capacity	76 L
Door hinge	down
Cord length	1.5 m
Control type	Rotary, Touch
Product color	Black, Stainless steel
Control position	Front
Appliance placement	Built-in
Clock type	Electronic
Current	16 A
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A+++ to D
Energy consumption (conventional)	- kWh
Package depth	689 mm
Package width	671 mm
Package height	747 mm
Package weight	49000 g

Weight and Dimensions

Depth	569 mm
Width	595 mm
Height	596 mm
Weight	42000 g
Depth with door open	1020 mm
Installation compartment depth	550 mm
Installation compartment width	568 mm
Installation compartment width (min)	560 mm
Installation compartment height (min)	590 mm