Miele H 2465 B User Manual

Installation
*INSTALLATION*
74
Electrical connection
 Danger of injury!
Installation, repairs and other main-
tenance work by unqualified persons
could be dangerous. Miele cannot be
held liable for unauthorised work.
The appliance may only be connected
to the mains electricity supply by a
qualified electrician who is familiar
with and complies with the national
regulations and any additional regula-
tions of the local electricity provider.
The appliance must be connected to an
electrical system designed in accord-
ance with VDE0100.
Connection to a switched socket (in
accordance with VDE0701) is recom-
mended as this provides easier access
in the case of a service call.
If the appliance is hardwired or if the
plug is not accessible, an additional
means of disconnection must be
provided for all poles.
Suitable means of disconnection include
switches with an all-pole contact gap of at
least 3mm. These include circuit break-
ers, fuses and contactors (EN60335).
Connection data is given on the data
plate situated at the front of the oven
compartment. Please ensure the con-
nection data matches the household
supply.
When contacting Miele, please quote
the following:
- Model identifier
- Serial number
- Connection data (mains voltage/fre-
quency/maximum rated load)
When replacing the cable supplied
with another cable or changing the
connection, only cable type
H05VV-F with a suitable cross-sec-
tional area (CSA) may be used.
Temporary or permanent operation on
an autonomous power supply system or
a power supply system that is not syn-
chronised with the mains power supply
(e.g. island networks, back-up systems)
is possible. A prerequisite for operation
is that the power supply system com-
plies with the specifications of
EN50160 or an equivalent standard.
The function and operation of the pro-
tective measures provided in the do-
mestic electrical installation and in this
Miele product must also be maintained
in isolated operation or in operation that
is not synchronised with the mains
power supply, or these measures must
be replaced by equivalent measures in
the installation. As described, for ex-
ample, in the current version of
VDE-AR-E2510-2.
Oven
The wires in the mains lead are col-
oured as follows:
Green/yellow = earth
Blue = neutral
Brown = live
 WARNING - THIS APPLIANCE
MUST BE EARTHED
For extra safety it is advisable to protect
the appliance with a suitable residual
current device (RCD).
Maximum connected load: see data
plate.

Miele H 2465 B Specifications

General

Grill	-
Oven size	Medium
Oven type	Electric
Top heating	Yes
Number of ovens	1
Total oven power	- W
Total oven(s) interior capacity	76 L
Door hinge	down
Cord length	1.5 m
Control type	Rotary, Touch
Product color	Black, Stainless steel
Control position	Front
Appliance placement	Built-in
Clock type	Electronic
Current	16 A
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A+++ to D
Energy consumption (conventional)	- kWh
Package depth	689 mm
Package width	671 mm
Package height	747 mm
Package weight	49000 g

Weight and Dimensions

Depth	569 mm
Width	595 mm
Height	596 mm
Weight	42000 g
Depth with door open	1020 mm
Installation compartment depth	550 mm
Installation compartment width	568 mm
Installation compartment width (min)	560 mm
Installation compartment height (min)	590 mm