Miele H 2860 B User Manual

Clock/timer
48
Changing settings
Default settings are set in the oven con-
trols at the factory (see “Settings over-
view”).
You change a setting by changing its
status.
 Turn the function selector to0.
 Press thesensor control un-
tilappears:
 
 If you want to change another setting,
press the or sensor control re-
peatedly until the relevant number
appears.
 Confirm withOK.
 
The setting is applied and the current
status appears, e.g.
To change the status:
 Press the or sensor control re-
peatedly until the status you want is
shown.
 Confirm withOK.
The selected status is now saved and
the setting appears again.
To change further settings, proceed in
the same way.
If you do not want to change further
settings:
 Wait approx. 15seconds until the
time of day appears.
The settings are retained in the event
of an interruption to the power supply.

Miele H 2860 B Specifications

General

Oven size	Large
Oven type	Electric
Self-cleaning	No
Number of ovens	1
Reheat function	-
Total oven power	- W
Oven net capacity	76 L
Oven thermostat range	30 - 250 °C
Number of shelf positions	5
Door hinge	down
Cord length	1.7 m
Control type	Rotary
Door material	Glass
Product color	Black, Stainless steel
Control position	Top right / left
Appliance placement	Built-in
Clock type	Electronic
Timer type	Digital
Lamp type	Halogen
Lamps quantity	1 lamp(s)
Current	16 A
Connected load	3500 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency index (EEI)	81.7
Energy consumption (conventional)	1.05 kWh
Energy consumption (forced convection)	0.71 kWh

Weight and Dimensions

Depth	569 mm
Height	596 mm
Weight	39000 g
Installation compartment depth	550 mm
Installation compartment width	568 mm
Installation compartment height	595 mm
Installation compartment width (min)	560 mm
Installation compartment height (min)	593 mm