Operation
54
Cancelling a cooking programme
without a set cooking duration
Touch the sensor for the selected
function.
The main menu will appear.
Or: select the sensor.
Select Cancel process.
Confirm with OK.
Cancelling a cooking programme
with a set cooking duration
Touch the sensor for the selected
function.
Cancel process? appears in the display.
Select Yes.
Confirm with OK.
Or: select the sensor.
Select Cancel process.
Confirm with OK.
Select Yes.
Confirm with OK.
Pre-heating the oven
The Boosterfunction is used to quickly
heat up the oven compartment in some
functions.
The Pre-heatfunction can be used with
any function (except Microwave) and
has to be switched on separately for
each cooking programme.
If you have set a cooking duration, it will
only start to count down after the
heating-up phase.
It is only necessary to pre-heat the oven
in a few instances.
Most dishes can be placed in a cold
oven. They will then make use of the
heat produced during the heating-up
phase.
For dark bread dough as well as beef
sirloin joints and fillets, pre-heat the
oven compartment when using the
Fan Plusfunction.
Booster
The Boosterfunction is used to quickly
pre-heat the oven compartment in
some functions.
This function is switched on as the
factory default setting for the following
functions (Other| Settings|
Booster| On):
- Fan Plus
- Auto Roast
- MW + Fan Plus
- MW + Auto Roast
If you set a temperature above 100°C
and the Boosterfunction is switched on,
a rapid heating-up phase heats the
oven compartment to the set
temperature. The grill element and ring
heating element come on together with
the hot air fan.
Delicate items (e.g. sponge or
biscuits) will brown too quickly on
the top if the Boosterfunction is
used.
Switch off the Boosterfunction for
these items.