Installation
133
The oven must not be operated
until it has been properly installed
within cabinetry.
Mounting the door handle
(depending on model)
Mount the handle onto the retaining
bolts.
Use the supplied Allen wrench to
tighten all four bolts.
If there are side handles, please
remove them.
Connect the power cord to the
electrical supply.
Push the oven into the cabinetry up
to the oven trim and align it.
Open the door and use the screws
supplied to secure the oven to the
side walls of the cabinetry through
the holes in the oven trim.
To Next Page
Loading...
Need help?
General
