Settings
45
Showroom Program
This mode enables the oven to be
demonstrated in showrooms without
heating up. It should not be set for
domestic use.
Demo Mode
If you have demo mode activated
Demo Mode is active. The appliance will
not heat up will appear when you turn
on the oven.
– On
Touch OK for at least 4 seconds to
activate demo mode.
– Off
Touch for at least 4 seconds to
deactivate demo mode. The oven
can then be used as normal.
Factory default
– Settings
Any settings that have been altered
will be reset to the factory default
setting.
– Favorites
All Favorites will be deleted.
– MW Power Levels
Power levels which have been
changed will be reset to the factory
default settings.
– Default temperatures
Any default temperatures that have
been changed will reset to the
factory default settings.
– MyMiele
All MyMiele entries will be deleted.
To Next Page
Loading...
Need help?
General
