Operation
48
TimeControl
The TimeControl indicator light lets you
know how much longer the programme
has to run with the door shut.
All four indicator lights under the work-
top will come on when the programme
starts. They will go out one after the
other from left to right in 20 minute in-
tervals an hour before the end of the
programme to let you know how long
the programme still has left to run.
– 4 indicator lights:
Programme start / Time remaining
exceeds 60 minutes
– 3 indicator lights:
Time remaining 60-41 minutes
– 2 indicator lights:
Time remaining 40-21 minutes
– 1 indicator light:
Time remaining 20-1 minute
– All indicators off:
The programme has finished
Energy management
To save energy, the dishwasher will
switch off automatically 10 minutes
after the last time a sensor has been
pressed or after the end of the pro-
gramme (see "Settings, Optimise
standby").
Press the sensor to switch the
dishwasher back on.
The dishwasher will not switch off
whilst a programme is running, during
the Delay start period or if there is a
fault.
To Next Page
Loading...
Need help?
General
