Programme options
54
Delay start
There are three ways of starting the pro-
gramme by means of delaying the start.
You can set the start time or the finish
time of a programme. You also have the
option of taking advantage of time vari-
able economy rates of electricity using
the EcoStart or SmartStart function.
When using the Delay start function,
make sure that the detergent com-
partment is dry before adding deter-
gent. Wipe dry with a cloth if neces-
sary. If the compartment is wet,
powder detergent can become
lumpy and stick to the dispenser,
with the result that it is not fully dis-
pensed.
Do not use liquid detergent when se-
lecting Delay start, as it can run into
the dishwasher before it is required.
Open the door.
Switch the dishwasher on using the
sensor.
Select the programme you want from
the main menu.
Press the button.
The indicator will light up.
You then have a choice of the Start at,
Finish at and EcoStart or SmartStart func-
tions.
Select the function you want.
Now enter the time you want.
If, while you are setting the time, you do
not press any sensors for several
seconds, the display will revert to the
previous menu. You will then have to
enter your settings again.
If you keep the relevant arrow sensor
pressed, the value shown will auto-
matically increase or decrease.
To Next Page
Loading...
Need help?
General
