Operation
49
At the end of the programme
At the end of a programme, the Time-
Control indicator light will go out with
the door shut. The buzzer might also be
sounding.
The programme has finished when Fin-
ished appears in the display and the
door has opened slightly (if applicable).
In the QuickPowerWash programme the
door will not open until a few minutes
after the programme has finished.
If the Consumption programmable func-
tion is switched on (see "Settings, Con-
sumption") you can now view the actual
energy and water consumption of the
programme which has just finished
The drying fan may continue to run for
a few minutes at the end of the pro-
gramme.
You can now empty the dishwasher.
If you have deactivated the auto-
matic door opening function (see
"Settings menu, AutoOpen"), but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.
Otherwise steam from the dish-
washer could damage the edge of
the worktop because the fan is no
longer running.
To Next Page
Loading...
Need help?
General
