Powered by TCPDF (www.tcpdf.org)
MUW216743-2 3
Contents
1 Introduction 4
1.1 UK Distributor information 4
1.2 About this
Supplementary Information
Document 4
2 Intended use 4
2.1 Introduction 4
2.2 Liquid Chemicals & Water Softener 4
2.3 User Proles 4
2.4 Warning and Safety Instructions 5
3 Overview 6
3.1 Guide to the machine 8
3.2 Using the machine 9
3.3 Adding and dispensing chemicals 11
3.4 DOS venting 12
4 Operation 14
4.1 Selecting a programme 14
4.2 Starting a programme 14
4.3 Automatic Drying 14
4.4 Drying 14
4.5 Programme sequence indicator 14
4.6 At the end of the programme 15
4.7 Cancelling a program 15
5 User maintenance 16
5.1 Routine checks 16
5.2 Cleaning the machine 17
6 Problem solving guide 18
6.1 Messages 18
6.2 Dispensing/dispensing systems 18
6.3 Insucient salt/water softener 19
6.4 Advisory codes (cycle interrupts) 20
6.5 Process related faults and messages 22
6.6 Door 23
6.7 Unsatisfactory cleaning and corrosion 24
6.8 Spray arm monitoring / wash pressure 25
6.9 Water inlet and drainage 25
6.10 Noises 26
6.11 Printer / serial interface 26
7 Specication 27
7.1 Technical Specication 27
8 Components and Spares 28
8.1 Components 28
8.2 Spares 28
9 Product Disposal 29
9.1 Waste Electrical & Electronic
Equipment (WEEE) Regulations 2006 29
Appendix 1 30
PG 8581 Dental - Components, Full Loads
and Load Congurations 30
Appendix 2 33
PG 8581 Veterinary - Load Carrier and
Basket Congurations 33
Appendix 3 37
Machine Settings Table 37
Appendix 4 38
Recommended Detergents & Rinse Aids 38
Appendix 5 39
Daily/Weekly Testing 39
To Next Page
Loading...
Need help?
General
