Miele PW 6101 Programming Instructions

Copy area
This option is used to copy an area from an
existing programme into another
programme. This adds a new area to an
existing programme, or overwrites an
existing area in that programme.
^
After selecting this option the following will
show in the display:
Copy ~ Area
Source programme: 1 Cottons
Source area: 1 Pre-wash e
S A
^
Press the rotary dial, select a source
programme number and then confirm your
selection.
^
Then go to the source area, and select
pre-wash, main wash or rinses and confirm
your selection.
Copy ~ Area
Target programme: 23 Sleeping bags -
Target area: 3 Rinses e
S A
^ Select and confirm your target programme
and then select and confirm the target
programme number.
^
Then select and confirm the target area,
and select pre-wash, main wash or rinses
and confirm your selection.
If a target area is not available (a name not
yet defined for it) the area number and the
standard name for the area will appear
(target area: pre-wash, main wash, rinses)
^
After entering your selection and pressing
the S button the copying procedure will be
carried out.
If an existing area is to be copied to a target
programme position the following security
message will appear in the display:
Copy ~ Area
Overwrite existing data?
e
S A
^
After pressing the S button the overwriting
procedure will be carried out and you will
be taken back to the "Copy" sub menu. If
you press the A button or, if you do not
touch any buttons in the next 30 seconds
the copying procedure will not be carried
out and you will be taken back to the
"Copy" sub menu.
Programming
M.-Nr. 06 533 430 11

Miele PW 6101 Specifications

General

Brand	Miele
Model	PW 6101
Category	Washer
Language	English