Copy block
This menu option is used for copying a block
from an existing programme to make a new
programme or into part of a programme. A
new block is added to the target
programme.
If there are already 10 blocks in the target
area the 10th block will be overwritten. If a
block is copied into a target area which
does not exist, then the new target area will
automatically be allocated a name.
^
After selecting this option the following will
show in the display:
Copy ~ Block
Source programme: 1 Cottons
Source area: 1 Pre-wash e
S A
^ Press the rotary dial, select a source
programme number and then confirm your
selection.
^ Then go to the source area, and select
pre-wash, main wash or rinses and confirm
your selection.
^ Select and confirm the source block option
and then select and confirm the source
block.
Copy ~ Block
Source block: Soak -
Target programme: 3 Sleeping bags e
S A
Copy ~ Block
Target area: 2nd rinse -
Target block: 4
S A
The first programme that has not been
locked or the last one selected will appear
as the target programme number.
^
Select and confirm the target programme
option and then select and confirm the
target programme number.
^
Then select and confirm the target area,
and select pre-wash, main wash or rinses
and confirm your selection.
The first free block will appear as the target
block.
^
Select and confirm the target block option
and then select and confirm the target
block.
^
After pressing the S button the copying
procedure will be carried out.
If, when copying, the 10th block needs to be
overwritten, a security message will appear
in the display.
^
After pressing the S button the overwriting
procedure will be carried out and you will
be taken back to the "Copy" sub menu. If
you press the A button or, if you do not
touch any buttons in the next 30 seconds
the copying procedure will not be carried
out and you will be taken back to the
"Copy" sub menu.
Programming
12 M.-Nr. 06 533 430
To Next Page
Loading...
Need help?
General
