Miele PW 6241 Operating Instructions

Peak load cut-out
If the peak-load cut out function is activated
the heating will switch itself off and any
programme running will be stopped. The
following message will appear in the display:
1 Cottons
Prog. stopped. Peak load cut-out.
Programme will continue
if
Once the peak load has finished the
programme will continue automatically as
before.
Communication module
This machine can be linked to a PC via a
communication module.
The shaft for the communication module is
located at the rear of the machine.
An editor programme is available from Miele.
Operating data
By pressing the \ "Operating data" button
the operating data module can be used to
read or delete operating data either before
the start of a programme, or after it has
finished.
1 Cottons 90 °C
2 Cottons universal 60 °C
3 Cottons intensive 60 °C
i \ FC A
After pressing the \ button the following
will appear in the display:
Operating data module
Total data
Programme data e
\ A
Selection choice:
– Total data
In this option all programme data is collated
and summarised.
– Programme data
Programme data contains all the data called
up during a programme.
– Delete data
- Module (Total data including programme
data)
- Total data (only delete total data)
- Programme data (only delete programme
data)
Pressing the button again deselects the \
"Operating data" option.
If there is no more memory available in the
operating data module a message will
appear after pressing the START button to
say that the operating data will be
overwritten.
If you press the A "Back" button or do not
press the START button within 30 seconds
the display will revert to the way it was
before starting the programme.
Optional modules
26 M.-Nr. 06 572 495

Miele PW 6241 Specifications

General

Brand	Miele
Model	PW 6241
Category	Washer
Language	English