Miele PWM 507 User Manual

5. Adding detergent
30
Adding fabric conditioner or liquid
starch separately
 Select the Separate rinse programme.
 Change the spin speed if necessary.
 Add fabric conditioner or liquid starch
to the  compartment. Do not ex-
ceed the maximum level mark.
 Touch the Start/Stop sensor.
It will be automatically dispensed in the
final rinse. At the end of the wash pro-
gramme a small amount of water re-
mains in the  compartment.
Adding starch separately
 Prepare the starch solution in accord-
ance with the manufacturer's instruc-
tions on the packaging.
 Select the Starch programme.
 Add the prepared starch to compart-
ment .
 Touch the Start/Stop sensor.
Tip: If starching separately or automat-
ically, thoroughly clean the dispenser
compartment, especially the siphon
tube, regularly.
Dye removers and dyes
 Damage due to colour run/dye
removers.
Colour run and dye removers can
cause corrosion in the washing ma-
chine.
Do not use colour run or dye re-
movers in this washing machine.
Only use dyes suitable for use in a
washing machine. The manufacturer's
instructions on the packaging must be
observed.

Miele PWM 507 Specifications

General

Drum capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (spin)	72 dB
Noise level (wash)	- dB
Delayed start timer	Yes
Number of washing programs	-
Current	16 A
AC input voltage	400 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Water consumption per cycle	37 L
Energy consumption washing per cycle	- kWh
Door hinge	Right
Water fill	Cold, Hot
Drum volume	64 L
Control type	Rotary
Loading type	Front-load
Product color	White
Door opening angle	167 °
Appliance placement	Freestanding
Package weight	104000 g

Weight and Dimensions

Depth	714 mm
Width	605 mm
Height	850 mm
Weight	100000 g
Door diameter	300 mm