Miele PWM 507 User Manual

Problem solving guide
59
The door will not open
Problem Cause and remedy
The door cannot be
pulled open during a
programme.
The door is locked during the wash programme.
 Touch the Start/Stop sensor control.
 Select Cancel programme or Add laundry.
The door will unlock and you will be able to pull it
open.
There is still water in the drum and the machine is un-
able to drain.
 Clean the drainage system as described under
“Opening the door in the event of a blocked drain
outlet and/or power cut”.
At the end of a pro-
gramme or when a pro-
gramme is cancelled,
the following appears in
the display:
 Cooling downor
Comfort cooling.
To protect the user against scalding, the door cannot
be opened if the suds temperature is higher than
55°C.
 Wait until the temperature in the drum has de-
creased and the message has gone out in the dis-
play.
The following appears
in the display:
Door lock jammed. Call
Service.
The door lock has jammed.
 Call Miele Service.

Miele PWM 507 Specifications

General

Drum capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (spin)	72 dB
Noise level (wash)	- dB
Delayed start timer	Yes
Number of washing programs	-
Current	16 A
AC input voltage	400 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Water consumption per cycle	37 L
Energy consumption washing per cycle	- kWh
Door hinge	Right
Water fill	Cold, Hot
Drum volume	64 L
Control type	Rotary
Loading type	Front-load
Product color	White
Door opening angle	167 °
Appliance placement	Freestanding
Package weight	104000 g

Weight and Dimensions

Depth	714 mm
Width	605 mm
Height	850 mm
Weight	100000 g
Door diameter	300 mm