Miele PWM 507 User Manual

Installation
71
 Use a level to check that the washing
machine is standing level.
 Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 again us-
ing the spanner supplied until it sits
firmly up against the housing.
 Risk of damage due to incor-
rectly aligned washing machine.
There is a danger of the washing ma-
chine moving about if the feet are not
secured.
Turn all 4 counter nuts for the feet
until they sit firmly up against the
housing. Please also check this for
the feet which did not need adjust-
ment.
Securing the washing machine
against slippage
 Secure the front feet of the washing
machine using the clamps supplied.
 Follow the fitting instructions sup-
plied.
External control equipment
The XCI box accessory is needed to
connect external control equipment,
such as payment systems, dispensing
systems or peak load control units.
Payment system
This washing machine can be fitted with
a payment system (optional accessory).
The necessary reprogramming must al-
ways be carried out by Miele Service or
a Miele Service Dealer.
Coins/tokens must be removed from
the coin box regularly. Otherwise, the
payment system will become blocked.

Miele PWM 507 Specifications

General

Drum capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (spin)	72 dB
Noise level (wash)	- dB
Delayed start timer	Yes
Number of washing programs	-
Current	16 A
AC input voltage	400 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Water consumption per cycle	37 L
Energy consumption washing per cycle	- kWh
Door hinge	Right
Water fill	Cold, Hot
Drum volume	64 L
Control type	Rotary
Loading type	Front-load
Product color	White
Door opening angle	167 °
Appliance placement	Freestanding
Package weight	104000 g

Weight and Dimensions

Depth	714 mm
Width	605 mm
Height	850 mm
Weight	100000 g
Door diameter	300 mm