Changing the programme sequence
47
A programme cannot be cancelled or
changed when operating a payment
system.
Changing a programme
After the start of a programme, it is no
longer possible to select a different pro-
gramme.
You will need to cancel the current pro-
gramme before you can select a new
one.
Programme cannot be changedappears
in the display if the programme se-
lector has been moved. The text dis-
appears when the programme selector
is set to the original programme.
Cancelling a programme
You can cancel a wash programme at
any time after it has started.
Disinfection programmes can only be
cancelled with a PIN code.
Touch the Start/Stopsensor.
SelectCancel programme.
The suds will be pumped away. The
programme is cancelled. The door lock
is released.
Pull open the door.
Remove the laundry.
If you want to select a different pro-
gramme:
Close the door.
Select the programme you want.
Add detergent to the detergent dis-
penser drawer, if necessary.
Touch the Start/Stopsensor.
The new programme will begin.
Switching on the washing ma-
chine after an interruption to
the power supply
If the washing machine is switched off
with the button during a wash pro-
gramme, the programme will be inter-
rupted.
Switch the washing machine back on
with the button.
Note the message in the display.
Touch the Start/Stopsensor.
The programme will also be interrupted
if power is interrupted by a power cut.
When power is resumed, confirm the
message in the display with OK.
Touch the Start/Stopsensor.
The programme continues.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
