Miele PWM 507 User Manual

Cleaning and care
51
Cleaning the drum, suds con-
tainer and drainage system
The drum, suds container, and drainage
system can be cleaned if necessary.
 Start the Clean machine programme.
 Add powder detergent to the 
compartment in the detergent drawer.
 At the end of the programme, check
the inner drum and remove any
coarse residues.
Use the Clean machine programme
regularly if you frequently use disin-
fection programmes.
Cleaning the water inlet filters
The washing machine has filters to pro-
tect the water inlet valve. Check these
filters every 6 months or so. Check the
filters more often if there are frequent
interruptions to the external water sup-
ply.
Cleaning the filters in the inlet hoses
 First turn off the stopcock.
 Unscrew the inlet hose from the stop-
cock.
 Remove the rubber seal 1 from the
recess.
 Using pointed pliers, take hold of the
plastic filter bar 2 and pull it through
the filter.
 Clean the plastic filter.
 Reassemble in reverse order.
Make sure there is no water leaking
from the screw thread.
Tighten the screw thread.

Miele PWM 507 Specifications

General

Drum capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (spin)	72 dB
Noise level (wash)	- dB
Delayed start timer	Yes
Number of washing programs	-
Current	16 A
AC input voltage	400 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Water consumption per cycle	37 L
Energy consumption washing per cycle	- kWh
Door hinge	Right
Water fill	Cold, Hot
Drum volume	64 L
Control type	Rotary
Loading type	Front-load
Product color	White
Door opening angle	167 °
Appliance placement	Freestanding
Package weight	104000 g

Weight and Dimensions

Depth	714 mm
Width	605 mm
Height	850 mm
Weight	100000 g
Door diameter	300 mm