Miele PWM 507 User Manual

5. Adding detergent
32
 Close the lid and press it firmly shut.
 Close the detergent drawer.
The capsule is opened by the act of
inserting it into the detergent drawer.
The contents can run out of the cap-
sule if you then remove it from the
capsule drawer before it is used.
Dispose of opened capsules.
The wash programme will dispense the
contents of the capsule at the correct
time.
When using CapDosing, water intake
to the  compartment takes place
solely via the capsule.
When using capsules, do not add ex-
tra fabric softener to the compart-
ment.
 Remove the empty capsule at the
end of the programme.
For technical reasons, a small amount
of water will remain in the capsule.
Deactivating or changing CapDosing
CapDosing can only be deactivated or
changed prior to the programme start.
 Touch the sensor.
 Select CapDosingand disable the se-
lected capsule.
External dispensing
The washing machine is pre-equipped
for connecting to external detergent
dispensing systems. A separate conver-
sion kit for external dispensing systems
is required. This must be fitted by Miele
Service or by a Miele Service dealer.

Miele PWM 507 Specifications

General

Drum capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (spin)	72 dB
Noise level (wash)	- dB
Delayed start timer	Yes
Number of washing programs	-
Current	16 A
AC input voltage	400 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Water consumption per cycle	37 L
Energy consumption washing per cycle	- kWh
Door hinge	Right
Water fill	Cold, Hot
Drum volume	64 L
Control type	Rotary
Loading type	Front-load
Product color	White
Door opening angle	167 °
Appliance placement	Freestanding
Package weight	104000 g

Weight and Dimensions

Depth	714 mm
Width	605 mm
Height	850 mm
Weight	100000 g
Door diameter	300 mm