Miele PWM 507 User Manual

Problem solving guide
61
Cleaning the drain filter
Once the flow of water ceases:
 Remove the drain filter completely.
 Clean the drain filter thoroughly.
 Check the drain pump impellers to
make sure they can rotate freely.
 Remove any foreign objects (e.g. but-
tons, coins, etc.) and clean the in-
terior.
 Put the drain filter back in place and
secure it.
 Water damage.
Water will escape from the machine
if you forget to replace the drain filter.
Replace the drain filter correctly and
tighten it securely.
Opening the door
 Danger of injury due to rotating
drum.
Reaching into a moving drum is ex-
tremely dangerous.
Always make sure that the drum is
stationary before reaching in to re-
move laundry.
 Use a screwdriver to unlock the door.
 Pull open the door.

Miele PWM 507 Specifications

General

Drum capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (spin)	72 dB
Noise level (wash)	- dB
Delayed start timer	Yes
Number of washing programs	-
Current	16 A
AC input voltage	400 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Water consumption per cycle	37 L
Energy consumption washing per cycle	- kWh
Door hinge	Right
Water fill	Cold, Hot
Drum volume	64 L
Control type	Rotary
Loading type	Front-load
Product color	White
Door opening angle	167 °
Appliance placement	Freestanding
Package weight	104000 g

Weight and Dimensions

Depth	714 mm
Width	605 mm
Height	850 mm
Weight	100000 g
Door diameter	300 mm