Operation
17
Control panel
a
language sensor
For selecting the current user
language.
The operating language is
displayed again at the end of
the programme.
b
back sensor
Takes you back one level in the
menu.
c
Touch display
d
Start/Stop sensor
For starting the selected
programme and cancelling a
programme that has already
started. The programme
selected can be started as
soon as the sensor starts
flashing.
e
Optical interface
For service technicians.
f
button
For switching the washing
machine on and off. To save
energy, the washing machine
will switch off automatically. It
is switched off 15minutes after
the end of the programme/Anti-
crease phase, or after being
switched on if no further
selection is made.
Sensors and touch display with sensors
The sensors, and Start/Stop and the sensors in the display
respond to fingertip contact. Every touch of the sensors is confirmed
by a keypad tone. You can adjust the volume of the keypad tone or
switch it off (see “Supervisor level”).
The control panel with the sensors and the touch display can be
scratched by pointed or sharp objects, e.g. pens.
Only touch the control panel with your fingers.
To Next Page
Need help?
General
