Miele PWM 514 User Manual

Supervisor level
54
Time
After selecting the clock format, you can set the time of day.
Clock format
- 24h clock
- 12h clock
- No clock
Set
- The time can be set.
Date
The date can be set after selecting the date format.
Date format
- DD.MM.YYYY
- YYYY.MM.DD
- MM.DD.YYYY
Date
- The date can be set.
Volume
The volume for various sounds can be changed.
- Finish tone
- Keypad tone
- Welcome tone
It can be set to one of 7 different levels or switched off altogether.
- Fault alarm
The fault alarm can be activated or deactivated.
Visibility
parameters
Various parameters, such as the temperature, spin speed, Extras,
etc., are displayed when a programme is selected. You can decide
which parameters should not be displayed. These parameters can
then not be edited during programme selection.
Factory setting: all parameters are visible (marked in orange)
Sorting Extras
In the setting Visibility parameters, Sort “Extras” appears in the
bottom line. Touch the sensor to change the sequence of Extras (see
“Supervisor level – Arranging programmes”).
“Machine” off
status
In order to save energy, the washing machine will switch off
automatically after the end of the programme or if no further
selection is made. This can be changed.
Changing this setting leads to increased energy consumption.
- No switch-off
- Switch off after 15 minutes (factory default)

Miele PWM 514 Specifications

General

Brand	Miele
Model	PWM 514
Category	Washer
Language	English