Cleaning and care
87
Cleaning the AutoDos
If the Clean AutoDos message is dis-
played, check that the fill channel is
clean, and clean it if necessary, e.g.
powder residues. This helps keep the
AutoDos working properly.
In order to ensure that the AutoDos
works at its best, check it each time
you replace the PowerDisk and clean
it if needed.
1 PowerDisk holder
2 Fill channel for dispensing the deter-
gent from the PowerDisk into the wash
cabinet
Turn the AutoDos lid to and open
it.
Remove the PowerDisk if appropriate.
Pull the PowerDisk holder upwards
by the yellow tabs and remove it.
When doing so, do not pull on the
side tab.
Use the tab (see arrow) to release
the fill channel and pull it out .
To Next Page
Loading...
Need help?
General
