Levelling the machine
The machine must be perfectly level to
ensure safe and proper operation.
^
The screw feet can be adjusted to
compensate for any unevenness in
the floor.
,
A ventilation gap of 10 mm must
be maintained between the base of
the machine and the floor. It must
not be blocked by deep pile
carpets, plinths, etc as this would
prevent a sufficient intake of air.
Room ventilation
The dryer operates by drawing in air
from the room in which it is located.
It is therefore very important to
ensure that there is adequate
ventilation in the room, by opening a
window, for example.
Otherwise running times and energy
consumption could be increased.
Installation and connection
33
To Next Page
Loading...
Need help?
General
