Miele T 7734 User Manual

Electrical connection U.K.
All electrical work should be carried out
by a suitably qualified and competent
person, in strict accordance with
current national and local safety
regulations (BS 7671 in the UK).
Ensure power is not supplied to the
appliance until after installation work
has been carried out.
The appliance is supplied with a mains
cable with moulded plug ready for
connection to a 230-240V mains
supply. Please ensure the connection
data quoted on the data plate match
the household mains supply.
Connection should be made via a
suitable switched socket which is easily
accessible after installation.
For extra safety it is advisable to protect
the appliance with a suitable residual
current device (RCD). Contact a
qualified electrician for advice.
Do not connect via an extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
Non-rewireable plugs BS 1363
The fuse cover must be refitted when
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words on the base of the
plug (as applicable to the design of
plug fitted).
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.
WARNING: THIS APPLIANCE
MUST BE EARTHED
Electrical connection
34

Miele T 7734 Specifications

General

Brand	Miele
Model	T 7734
Category	Dryer
Language	English

Summary

Warning and Safety Instructions

Correct Application and Usage

Defines the intended domestic use and limitations of the tumble dryer.

Safety with Children

Precautions to ensure children's safety around the appliance.

Technical Safety Precautions

Essential electrical and installation safety measures for the dryer.

Correct Use of Textiles

Lists textiles that must not be dried to prevent fire hazards.

Ventilation and Room Safety

Ensures adequate room ventilation for safe operation and to avoid toxic fumes.

Operating the Tumble Dryer

Control Panel Overview

Notes on Laundry Care

Drying Tips and Recommendations

How to Dry Correctly

Basic Operating Steps

Step-by-step guide for loading, turning on, and operating the dryer.

Laundry Sorting and Loading

Programme Selection Guide

How to choose the appropriate drying programme and drying levels.

Starting and Finishing the Drying Cycle

Steps for starting a programme and removing laundry after completion.

Programme Chart

Cotton Programmes Details

Cleaning and Care

Cleaning the Fluff Filter

Detailed steps for cleaning the fluff filter to ensure efficient operation.

Filter Cleaning Methods

Cleaning Dryer Exterior

Problem Solving Guide

Check and Fault Messages

Troubleshooting common problems and interpreting error messages displayed.

Clean Out Airways Indicator

Troubleshooting the 'Clean out airways' indicator light and related issues.

Drying Process Issues

Resolving problems like long drying times, switching off, or insufficient drying.

Starting and Operational Issues

Troubleshooting why the dryer may fail to start or respond to commands.

Installation and Connection

Installation Site Requirements

Essential conditions for placing the dryer, including worktop clearance.

Levelling the Machine

Ensuring the dryer is perfectly level for safe and proper operation.

Room Ventilation Importance

Crucial need for adequate room ventilation for dryer performance and safety.

Electrical Connection

UK Electrical Safety and Connection

Ensures compliance with UK safety regulations for electrical connection.

Installation - Venting

General Venting Requirements

Key considerations for installing a suitable external venting system for moist air.

Venting Procedure and Materials

Calculating Vent Duct Length and Diameter

Method for calculating the required duct length and ensuring correct diameter.

Appliance Venting Connections

Flexible Ducting Hose Venting

Plastic Piping Venting

Direct Wall Vent Connection

Technical Data

Programmable Functions

Adjusting Residual Moisture for Cottons

Customizing the dryness level for the Cottons programme.

Adjusting Residual Moisture for Minimum Iron

Adjusting Automatic Programme Drying Level

Clean Out Airways Indicator Settings

Customizing when the 'Clean out airways' indicator light is activated.

Adjusting for Very Soft Water

Extending Drying Level Range