Miele T 7734 User Manual

c Connect directly to a wall
vent
The best method of venting the dryer
is to connect it directly to the outside
wall of a room. Time and energy
consumption are better with plastic
piping. This involves boring through
an outside wall.
A wall pipe* and a flexible foam gasket*
must be used
(* Miele optional accessories).
A Before drilling into the wall, . .
. . . please read the installation
instructions supplied with the Miele
wall vent kit.
. . . and study the following
diagrams.
View from above:
1. Wall pipe
2. Flexible foam gasket
Side view:
1. Wall pipe
2. Flexible foam gasket
B Fit the foam gasket (2) onto the
adapter (1) on the wall pipe.
C Push the dryer up against the wall.
Installation - venting
41

Miele T 7734 Specifications

General

Brand	Miele
Model	T 7734
Category	Dryer
Language	English

Summary

Warning and Safety Instructions

Correct Application and Usage

Defines the intended domestic use and limitations of the tumble dryer.

Safety with Children

Precautions to ensure children's safety around the appliance.

Technical Safety Precautions

Essential electrical and installation safety measures for the dryer.

Correct Use of Textiles

Lists textiles that must not be dried to prevent fire hazards.

Ventilation and Room Safety

Ensures adequate room ventilation for safe operation and to avoid toxic fumes.

Operating the Tumble Dryer

Control Panel Overview

Notes on Laundry Care

Drying Tips and Recommendations

How to Dry Correctly

Basic Operating Steps

Step-by-step guide for loading, turning on, and operating the dryer.

Laundry Sorting and Loading

Programme Selection Guide

How to choose the appropriate drying programme and drying levels.

Starting and Finishing the Drying Cycle

Steps for starting a programme and removing laundry after completion.

Programme Chart

Cotton Programmes Details

Cleaning and Care

Cleaning the Fluff Filter

Detailed steps for cleaning the fluff filter to ensure efficient operation.

Filter Cleaning Methods

Cleaning Dryer Exterior

Problem Solving Guide

Check and Fault Messages

Troubleshooting common problems and interpreting error messages displayed.

Clean Out Airways Indicator

Troubleshooting the 'Clean out airways' indicator light and related issues.

Drying Process Issues

Resolving problems like long drying times, switching off, or insufficient drying.

Starting and Operational Issues

Troubleshooting why the dryer may fail to start or respond to commands.

Installation and Connection

Installation Site Requirements

Essential conditions for placing the dryer, including worktop clearance.

Levelling the Machine

Ensuring the dryer is perfectly level for safe and proper operation.

Room Ventilation Importance

Crucial need for adequate room ventilation for dryer performance and safety.

Electrical Connection

UK Electrical Safety and Connection

Ensures compliance with UK safety regulations for electrical connection.

Installation - Venting

General Venting Requirements

Key considerations for installing a suitable external venting system for moist air.

Venting Procedure and Materials

Calculating Vent Duct Length and Diameter

Method for calculating the required duct length and ensuring correct diameter.

Appliance Venting Connections

Flexible Ducting Hose Venting

Plastic Piping Venting

Direct Wall Vent Connection

Technical Data

Programmable Functions

Adjusting Residual Moisture for Cottons

Customizing the dryness level for the Cottons programme.

Adjusting Residual Moisture for Minimum Iron

Adjusting Automatic Programme Drying Level

Clean Out Airways Indicator Settings

Customizing when the 'Clean out airways' indicator light is activated.

Adjusting for Very Soft Water

Extending Drying Level Range