Extending the drying level for
the "Minimum iron"
programme
The electronics of this dryer ensure a
very effective and energy-efficient
drying process.
You can, however, extend the range
of the drying level in this programme
so that there is more or less moisture
in laundry at the end of the
programme.
Follow steps (A,B,C ...) to
programme and store in memory.
Before you begin, first ensure that:
– The dryer is switched off.
– The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
Wait until the indicator light for the
Start/Stop button lights up constantly
...
C . . . and then release the Start/Stop
button.
D Press the Gentle tumble button once.
–
The Gentle tumble indicator light will
briefly flash twice.
The option selected will be displayed
by a number which will alternate with
P.
0 The drying level will be damper
I Factory default setting
(the Automatic plus indicator light will
also flash once)
2 The drying level will be drier
(the Automatic plus indicator light will
also flash twice)
E Pressing the Start/Stop button
switches from one number to the
other.
F Switch the dryer off.
The setting you have selected is now
stored in memory. You can alter the
settings again at any time.
Check
^ Repeat steps A to D.
^
Switch the dryer off after step D.
Programmable functions
54
To Next Page
Loading...
Need help?
General