Extending the drying level
range
You can extend the range of the
drying levels for many of the
programmes:
Machine iron +
(drier than Machine iron).
Light dry
(dryer than Hand iron).
Normal+
(dryer than Normal).
You can use this programming function
only for programmes which allow you to
select the drying levels.
Follow steps (A,B,C ...) to
programme and store in memory.
Before you begin, first ensure that:
– The dryer is switched off.
– The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
Wait until the indicator light for the
Start/Stop button lights up constantly
...
C . . . and then release the Start/Stop
button.
D Press the Gentle tumble button nine
times.
–
The Gentle tumble indicator light will
flash slowly once and will then flash
quickly three times.
The option selected will be displayed
by a number which will alternate with
P.
0 Factory default setting
i Drying level range extended
(The Automatic plus indicator light
will also flash)
E Pressing the Start/Stop button
switches from one number to the
other.
F Switch the dryer off.
The setting you have selected is now
stored in memory. You can alter the
settings again at any time.
Check
^ Repeat steps A to D.
^ Switch the dryer off after step D.
To select the extended drying levels
^
Select a programme.
^
Press the drying level button
repeatedly until one or two indicator
lights come on.
–
Indicator lights Extra dry and Normal
= Normal+
–
Indicator lights Hand iron and
Normal = Hand iron+
–
Indicator lights Machine iron and
Hand iron = Machine iron+
Programmable functions
63
To Next Page
Loading...
Need help?
General