Cleaning the fluff filters
The fluff which is created by the drying
process is collected by the fluff filters in
the door and the door opening. Clean
the filters after each drying
programme*.
Cleaning them whilst dry
Tip: You can also use a vacuum
cleaner to remove the fluff.
^
Open the door and pull the fluff filter
(1) out of the door as illustrated.
^
Use your fingers to remove the fluff
from the surface of the filter.
^
Remove any fluff from the hollow part
of the door opening. You could also
use a cleaning brush which is
available as an optional extra from
your Miele Chartered Agent or from
Miele, or use a vacuum cleaner.
^
Also clean the door seal (2) with a
damp cloth.
^
Once clean, push the filter back into
the door holder until it clicks into
position. Ensure it is facing the
correct way.
^
Use your fingers or a vacuum cleaner
to remove the fluff from the two fluff
filters in the door opening.
^
Close the door.
* Always check the fluff filters if the
Clean out airways indicator light
comes on.
,
A clogged filter is a fire hazard!
The lint filter must be cleaned after
every programme.
Cleaning and care
28
To Next Page
Loading...
Need help?
General
