Miele T 8843 C User Manual

Anti-crease setting
Helps prevent creasing if laundry is
not normally removed immediately
after the end of a programme.
Anti-crease
–
is set as a standard setting. You can
shorten the time or switch it off
completely.
–
can be used for all programmes,
except Woolens handcare.
–
should always be switched on.
Follow steps (A,B,C ...) to
programme and store in memory.
Before you begin, first ensure that:
– The dryer is switched off.
– The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
Wait until the indicator light for the
Start/Stop button lights up constantly
...
C . . . and then release the Start/Stop
button.
D Press the Low temperature button
twice.
–
The Low temperature indicator light
will briefly flash on and off three
times.
The option selected will be displayed
by a number which will alternate with
P.
0 Anti-crease deactivated.
I 1 hour Anti-crease
(The Automatic plus indicator light
will also flash once.)
2 Default setting. 2 hours
Anti-crease.
(The Automatic plus indicator light
will also flash twice.)
E Pressing the Start/Stop button
switches from one to the other.
F Switch the dryer off.
The settings have been changed. You
can alter the settings again at any time.
Control
^ Repeat steps A to D.
^ Switch the dryer off after step D.
Programmable functions
52

Miele T 8843 C Specifications

General

Brand	Miele
Model	T 8843 C
Category	Dryer
Language	English