Miele T 8843 C User Manual

Extending the cooling down
time
The cooling down phase which takes
place before the end of a programme
can be lengthened if required. This
makes the garments easier to handle.
The cooling down time is only available
for programmes with drying levels.
Follow steps (A,B,C ...) to
programme and store in memory.
Before you begin, first ensure that:
– The dryer is switched off.
– The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
Wait until the indicator light for the
Start/Stop button lights up constantly
...
C . . . and then release the Start/Stop
button.
D Press the Low temperature button
five times.
–
The Low temperature indicator light
will briefly flash on and off seven
times.
The option selected will be displayed
by a number which will alternate with
P.
0 Default setting
I The cooling down time will be five
minutes longer.
(The Automatic plus indicator light
will also flash once.)
2 The cooling down time will be ten
minutes longer.
(The Automatic plus indicator light
will also flash twice.)
E Pressing the Start/Stop button
switches from one to the other.
F Switch the dryer off.
The settings have been changed. You
can alter the settings again at any time.
Control
^ Repeat steps A to D.
^
Switch the dryer off after step D.
Programmable functions
55

Miele T 8843 C Specifications

General

Brand	Miele
Model	T 8843 C
Category	Dryer
Language	English