Before using for the first time
19
Removing the protective foil
and stick
ers
Remove
– the protective foil from the door.
– any stickers from the front and the
lid.
Please do not r
emove any labels
(e.g. the data plate), visible when you
open the door.
After installing the dryer
Befor
e using the tumble dryer for
the first time, ensure that it is instal‐
led and connected to the electricity
supply correctly. If it has not been
transported as described in "Installa‐
tion and connection" then it must be
left to stand for at least 1 hour before
it is connected to the electricity sup‐
ply.
When the tumble dryer is switched on
the welcome display Mi
ele Willkommen
will appear briefly.
Setting the language
You will be asked to select the lan‐
gua
ge you want for the display. It is
possible to change the language at any
time via
Settings.
Y
ou can scroll through the list by
touching the and sensors until
the language you want is highlighted
in the display.
Confirm your choice of language by
t
ouching the OK sensor.
To Next Page
Loading...
Need help?
General
