Problem solving guide
63
Steam smoothing spray jet
Limescale deposits will impair
the
spray jet.
In this case, the spray jet must be re‐
move
d and replaced with a new one
(see "Accessories").
The spray jet can only be replaced us‐
ing
the special tool supplied with the
new spray jet.
Do not use any other tool as this
would damage the spray jet or the
dryer.
S
team smoothing must never be
used without the spray jet fitted and
screwed in correctly.
Open the door of the tumble dr
yer.
The spray jet is located in the top left of
the door opening.
A
ttach the tool to the spray jet.
T
urn the tool anti-clockwise to un‐
screw the spray jet.
Inser
t the new spray jet in the tool.
T
urn the tool clockwise to screw the
spray jet securely in position.
To Next Page
Loading...
Need help?
General
