Miele TKR 450 WP User Manual

EcoFeedback
21
You can use the EcoFeedback sensor
t
o call up information about the energy
consumption of your dryer.
Touching the EcoFeedback
sensor will
call up two types of information:
– an estimate of the consumption be‐
fore the programme begins
– the energy consumption
during the
programme.
The EcoFeedback
sensor will light up
and information will appear in the dis‐
play.
Both will go out automatically a few
seconds later or alternatively they can
be confirmed with
OK.
At the end of the programme, before
openin
g the door, you can also call up
the following in the display:
– the energy consumption and
– the degree of soiling of the fluff filters
and the plinth filt
er (0 % = light, 50 %
= medium, 100 % = heavy). Accumu‐
lating fluff and soiling will cause the
programme duration to increase
which in turn will increase energy
consumption.
1. Estimate
 Aft
er selecting a programme, touch
the EcoFeedback sensor.
For a few seconds bars which indicate
the estimat
ed consumption will appear:
Energy
The more bars visible, the higher the
ener
gy consumption.
The estimate will vary depending on the
pr
ogramme and any options selected.
2. Actual consumption
 T
ouch the EcoFeedback sensor.
You can view the actual amount of en‐
er
gy used.
Example:
Energy 2,0 kWh
< 0.1 kWh will be displayed if the ener‐
gy con
sumption is very low.
The consumption will vary depending
on the programme stage and residual
moisture present.
If the door is opened or the tumble
dr
yer has switched off automatically
at the end of the programme, the da‐
ta will revert to the estimated con‐
sumption.
Total consumption setting
– shows consumption data for the pro‐
gr
amme which has just been run
and
– shows total energy consumption to
dat
e.
See "Settings menu" for more detailed
information.

Miele TKR 450 WP Specifications

General

Brand	Miele
Model	TKR 450 WP
Category	Dryer
Language	English