Problem solving guide
66
The following fault message appears in the display at the end of
a programme
Problem Possible cause and remedy
Check detergent
Excessive foam has built up during washing.
Check the amount of detergent dispensed.
With automatic detergent dispensing, check the
dosage amount set.
Observe the instructions on the detergent
packaging and the degree of soiling of the laundry.
If necessary, reduce the dosage amount by
increments of 10%.
Hygiene info
A programme of at least 60°C has not been run for a
long period of time.
In order to prevent bacteria and unpleasant odours
building up in the machine, run the Clean machine
programme using Miele dishwasher and washing
machine cleaner or powder detergent.
Container 1 empty
or
Container 2 empty
or
Cont. 1 + 2 empty
The TwinDos container (or containers) is empty.
Fill the container or containers with liquid
detergent or fabric softener or replace the
cartridge(s).
Check if the laundry is clean. There may not have
been enough detergent used.
If necessary, wash the items again.
The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the OK sensor.
To Next Page
Loading...
Need help?
General