Miele WT 2670 WPM User Manual

What to do, if...
With the help of the following notes, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a suitably
qualified person in accordance with local and national safety regulations.
Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held liable for unauthorised work.
The programme does not start.
Problem Possible cause Remedy
The display remains
dark and the
programme selector is
not lit up.
Thereisnopowerto
the machine.
Check whether
– the mains plug is plugged
in and switched on.
– the fuse or circuit breaker
has tripped.
The display shows:
Machine locked
Enter code.
The electronic system
lock has been
activated (see Settings
menu J/Lock).
Enter the code for the system
lock and confirm the entry.
Deactivate the system lock if
you do not wish this message
to appear in the display the
next time the machine is
switched on.
The programme does
not start when Drain/
Spin has been
selected.
The machine has not
been prepared for
using for the first time.
Prepare the machine as
described in "Before using for
the first time".
The display is dark. The display has
switched off
automatically to save
energy (Standby
mode).
Press a button. Standby
comes to an end.
Problem solving guide
50

Miele WT 2670 WPM Specifications

General

Door hinge	Left
Loading type	Front-load
Product color	White
Appliance placement	Freestanding
Washing capacity	5 kg
Delay start (max)	24 h
Maximum spin speed	400 RPM
Washing class	A
Water consumption per cycle	65 L
Energy consumption washing per cycle	3.4 kWh
Drum interior light	Yes

Weight and Dimensions

Depth	580 mm
Width	595 mm
Height	850 mm