4-3
Enter the right information in LIS manufacturer and LIS text box. Set the Index for
test, quantitative result, qualitative result, unit, sample type in consistent with those
provided by LIS. The index number will be the unique symbol recognized by LIS,
facilitating the communication between the analyzer and the LIS. If the wrong index
number is set, the result can not be correctly uploaded.
The detailed operation is as follows: select Test config., the list on the right of the
screen will list the names of all the routine and calculation tests. Select one test,
enter its index number in Index column. Click save to complete the setting.
When the system is connected with data management software, In Instrument
reg.—Channel No. setup, the channel No. of fields like test information, sample
type should be consistent with System—LIS setup in BA-88A, otherwise, the
information can not be uploaded correctly.
After all the settings are complete, click Save to return to the main screen.
4.8 Maintenance
You can do maintenance on the database or the instrument; manage the system log
on Maintenance screen.
NOTE
While doing maintenance, only use the component provided by
Mindray customer service department or your local distributor.
4.8.1 Database
On Database screen, you can check the maximum capacity for storing the test
results and the remaining capacity. Deleting history data to release space can also
be done on this screen. If maximum capacity is reached, new test result will replace
the history result automatically.
Select DB backup to transfer the test information and test result on the analyzer to
USB disk.
To Next Page
Loading...
Need help?
General
