Databse: SqlServer 2005 Express
Network communication: 10/100M 10/100M
Communication interface: RS-232C
Hard disk ( the disk on which the software is installed): 10G
Printer (connected with PC)
2.2 Installation Procedures
1 When you receive the system, carefully inspect the package. After opening
the package, check the delivered goods against the packing list.
2 Move the instrument to the installation site and remove all the package and
protective materials.
3 Connect the instrument to waste container.
4 Connect the power cable and power on the analyzer. After self-check and
tubing wash is completed, the main screen is displayed.
5 After the system is stable, request one or two routine tests and run. Assess
the test results. Please refer to the operator’s manual for details.
6 Follow the normal procedure to shutdown the analyzer.
7 Training:
Is the customer familiar with the daily, weekly and monthly maintenance and
relevant maintenance methods? Yes □ No □
Is the customer familiar with cleaning and washing the system?
Is the customer familiar with replacing the peristaltic pump tubing and
calibrating the flow volume? Yes □ No □
Is the customer familiar with replacing the aspiration tubing? Is the customer
familiar with replacing the lamp? Yes □ No □
To Next Page
Loading...
Need help?
General
