6 Troubleshooting
This chapter presents all warning messages and recommended corrective actions,
which should be taken in time once any error occurs.
When an error or failure occurs, relevant alarm message will be displayed, and the
system will take corresponding actions.The logs will record the time, level, code and
detailed information of each warning to help user record and search errors.
6.1 Alarm Message Classification
The error messages are divided into different types according to their severity.
In case of an error/warning message, check its error code on the Logs screen, and
then check the table below for recommended corrective measures.
WARNING
When troubleshooting the analyzer, first find out whether it is necessary
to switch off the Main Power or Power.
BIOHAZARD
Wear gloves and lab coat and, if necessary, goggles.
6.2 Levels
Of all the system failures, the causes of many failures are similar. Classifying the
failure into different levels and allocating all failures to different levels will facilitate
troubleshooting and make failures of the same level have common corrective
measures.
All the failures recorded in the log can be classified into 3 levels.
To Next Page
Loading...
Need help?
General
