Mindray DC-70T Service Manual

System Diagnosis and Support 11-5
11.2.1 Power-on of Entire Device Supplied by AC
Basic operations
Process phenomenon
Plug the power supply cord into line
voltage
Power indicator of control panel is on; battery
indicator is on (if battery does exist); hard disk
indicator and standby indicator are off.
Press power button on the control panel
Power-on indicator of control panel blinks in green,
and then remains green.
Power-on is completed.
1: The control panel backlight is on.
2: Monitor backlight is on
3: The fan starts to run.
After the initialization of hardware and logic
configuration are completed, PC enters
into BIOS stage.
The monitor appears in blank screen for about 1
second.
11.2.2 Start-up Process of BIOS
Basic Procedures
Basic phenomenon
Self test after the system is powered on.
The LCD is in blank screen and the blank screen
appears and disappears fast.
Start initialization process & record
system settings & provide the resident
program library.
BIOS start-up display
Load the operation system
Display BIOS interface when loading. After completing
the loading, the black screen appears. Then,
WINDOWS interface appears.
11.2.3 Windows Start-up
Basic Procedures
Basic phenomenon
The loading of guiding the
program
The monitor appears in blank screen now, and it disappears
fast.
The course for the test and hard
disk configuration
The monitor appears in blank screen now, and it disappears
fast.
The course for loading the internal
core
The logo “mindray” appears.
The course of logging on
Ditto
Starting DOPPLER
The company logo appears, and simultaneously progress bar
shows the related information.

Mindray DC-70T Specifications

General

Brand	Mindray
Model	DC-70T
Category	Medical Equipment
Language	English