Why is the image quality degraded on my Mindray Diagnostic Equipment?
If the image quality on your Mindray Diagnostic Equipment is degraded, first, ensure that you've selected the correct exam mode. If the issue persists, adjust the image post-processing settings or revert to the default values. As a last resort, try resetting the system to the factory default presets.
What to do if the Mindray DC-80 EXP Diagnostic Equipment monitor is on, but the image is blank?
If your Mindray Diagnostic Equipment monitor is on but the screen remains blank, the issue might be due to restarting the system too quickly. Turn off the system, wait at least one minute, and then restart it. Also, check the monitor's brightness and contrast settings and restore them to their factory defaults if needed.
What to do if my Mindray DC-80 EXP monitor displays characters but no images?
If the monitor of your Mindray Diagnostic Equipment displays characters and menus but no images, try adjusting the transmission power, gain, or TGC control. Also, ensure the probe is correctly connected. Finally, check if the system is in a frozen state and unfreeze the image.
What to do if the button is responseless with the Mindray DC-80 EXP Diagnostic Equipment buzzing?
If a button on your Mindray Diagnostic Equipment is unresponsive and the system buzzes, dirt might be blocking the button. Inspect the control panel for any obstructions and press the button repeatedly to try to dislodge any debris. If that doesn't work, clean the button thoroughly.
How to fix a Mindray Diagnostic Equipment when the power indicator does not turn on?
If the power indicator on your Mindray Diagnostic Equipment doesn't light up after connecting the AC power, check if the system is properly plugged in. Ensure that the circuit breaker is in the Up position and verify that the plug is securely connected to the back of the system.
General| Touchscreen | Yes |
|---|---|
| Transducer Ports | 4 |
| Power Supply | 100-240V AC, 50/60 Hz |
| Imaging Modes | Color Doppler, Power Doppler |
| Operating System | Windows |
| Storage | 1 TB HDD |
| Connectivity | DICOM, Ethernet, USB |
| Applications | General Imaging, Cardiology, Vascular, Pediatrics |
| Weight | 85 kg |
Provides essential safety measures for operating the system, including power connection and probe handling.
Provides a comprehensive guide to the system's operation panel layout and controls.
Details on connecting the power cord and protective grounding for safe operation.
Step-by-step guide on how to safely power on the ultrasound system.
Correct procedures for powering off the system to prevent data loss or damage.
Detailed procedures for safely connecting and disconnecting ultrasound probes.
Guides the user through entering patient information for a new exam.
Details the fields and input methods for new patient information.
Instructions for selecting the appropriate exam mode and probe for an examination.
Guidance on choosing and optimizing the imaging mode for better results.
Steps for pausing an ongoing exam and properly ending an exam.
Details on switching between imaging modes and adjusting image parameters.
Comprehensive guide to optimizing B Mode images, including procedures and parameters.
Detailed instructions for optimizing M Mode images and parameters.
Guidance on optimizing Color Mode images, parameters, and features.
Steps and parameters for optimizing Power Mode images.
Procedures and parameters for optimizing PW/CW Doppler mode images.
Explains the Color M Mode for cardiac motion analysis and its parameters.
Details on Anatomical M Mode, including Free Xros M and Free Xros CM imaging.
Guides for Tissue Doppler Imaging (TDI) modes and parameters.
Introduction to 3D/4D imaging principles, terms, and basic concepts.
Step-by-step guide for performing Static 3D imaging acquisition.
Instructions for acquiring images using the Smart 3D imaging function.
Guidance on performing Spatio-Temporal Image Correlation (STIC) imaging.
Steps for acquiring and operating iPage+ imaging for multi-slice visualization.
Instructions for performing SCV+ imaging to reduce speckle noise and improve contrast.
Guides for performing Color 3D imaging, including operation controls.
Steps for using Smart Volume for fast volume calculation and analysis.
Instructions on activating and using the iLive imaging feature for enhanced visualization.
Steps for performing Smart Follicles Calculation (Smart FLC).
Guidance on using Smart Planes CNS for fetal brain anatomical assessment.
Steps for performing iScape panoramic imaging to extend the field of view.
Guides for performing contrast imaging to enhance blood flow visualization.
Instructions for performing Strain Elastography and STE Imaging.
Steps for acquiring cardiac loops for multiple-phase stress echo protocols.
Guides for performing Tissue Tracking Quantitative Analysis for myocardial motion.
Guides for configuring system-wide settings like hospital info, language, and time.
Settings for default probes, MITI values, and image saving standards.
Allows assigning functions to keys and footswitches for customized operations.
Allows assigning available exam modes to specific probes.
Configuration for DICOM and HL7 communication protocols.
Settings for printers, print services, and image printing properties.
Details on supported probes, storage, and disinfection conditions.
Describes general procedures for operating the probe, including biopsy functions.
Instructions for cleaning and disinfecting ultrasound probes to prevent infection.
Detailed steps for performing ultrasound-guided biopsy procedures.
Details on needle-guided bracket parts, functions, and compatibility.
Step-by-step instructions for inspecting and installing needle-guided brackets.
To Next Page
