To Next Page

To Previous Page

Disassembly of DP-9900Plus/DP-9900

3-13

2. Disassemble the upper rear cover.

3. Disconnect the power cable and data line from the hard disk and then release the

four screws that secure the hard disk.

3.9. Disassembly of Power Conversion Board

1. Release the four M4×8 screws on the lower rear cover. Then disconnect cables

from the power conversion board and remove the lower rear cover with the power

conversion board on it.

2. Remove the power conversion board from the lower rear cover.

Mindray DP-9900 User Manual

Other manuals for Mindray DP-9900