System Maintenance
6-2
Use a clean cloth dipped with neutral detergent to remove dust on the covers of the
main unit and on the control panel. If there is some difficulty to clean the control
panel, disassemble keys from it and then use neutral detergent to clean it.
3. To clean the monitor
Check if the monitor is skew and the fixing structure is loose. Use a dry clean cloth to
remove the dust on the monitor.
4. To clean the transducer
Use a dry clean cloth to remove dust on the transducer surface and check if there is
abnormality such as crack. Then connect it to the system. Use a soft brush to clean
the transducer holder.
5. To clean the video printer
Clean the thermal head according to the operation manual of the printer.
6. To clean cables
Use a clean cloth dipped with neutral detergent to clean the power cord and other
cables.
6.2. Software Maintenance
1. Before maintain software, ensure the data to be used matches the system to avoid
system damage and backup the preset data according to the following procedure.
a) Press [Preset] key to enter the preset menu.
b) Move the cursor to the [Preset Data] and select [Save].
To Next Page
Loading...
Need help?
General
